Q:

How does an electrical transformer work?

A:

Quick Answer

Transformers have two sets of wires wound around an iron core, and they use electromagnetic induction to increase or decrease electrical current. The primary wires magnetize the iron after the application of current, and the secondary wires use the magnetic induction to create an output current. The increase or decrease of output current depends on how many times the input and output wires wind around the core.

Continue Reading
How does an electrical transformer work?
Credit: born1945 CC-BY-2.0

Full Answer

All transformers operate on the same basic principle, no matter their size. An iron core shaped like a picture frame has two sets of insulated wires wound around the opposing sides. The primary winding creates a magnetic field in the iron, and the secondary winding uses the magnetic field to create an output current. If the primary winding has 100 turns and the secondary has 200 turns, then the output voltage doubles but the amperage drops by half. Reverse the wiring and the output amperage doubles with the voltage dropping by half. Using a combination of windings, engineers can control how much current is increased or decreased. The large transformers found on utility poles decrease or step down high voltage/low amperage current to more manageable levels for home use. For amplifiers and other electronics, a transformer may increase, or step up voltage as needed.

Learn more about Electricity

Related Questions

  • Q:

    How does a dynamo generator work?

    A:

    A dynamo generates electricity by using a magnetic field to imbue wires with an electric current. According to the Edison Tech Center, this process generates a direct current that can then be fed down the wires to an alternator for conversion to an alternating current; these alternators are sometimes known as generators.

    Full Answer >
    Filed Under:
  • Q:

    How does an electric bulb work?

    A:

    An electric light bulb works by conducting an electric current through its wires and the filament once it gets connected to a power supply. As the current flows through the components of an electric bulb, it generates light by increasing their heat levels.

    Full Answer >
    Filed Under:
  • Q:

    How does a two-way light switch work?

    A:

    A two-way light switch produces light when two of three wires transport a current to either end of the installation. The third wire creates repetitive switching at either end. The red wire is the traveler that carries the current from one switch to another. The two black live cables switch power into the circuit, and the green cable is the ground cable that is wired between the devices.

    Full Answer >
    Filed Under:
  • Q:

    What is electromagnetic induction?

    A:

    Electromagnetic induction is the phenomenon of using a magnet to create, or induce, a magnetic field in a conductor while simultaneously dislodging free electrons within it. This produces a flow of current and a rising and collapsing magnetic field around the conductor, which is the opposite polarity to that of the magnet from which it was induced.

    Full Answer >
    Filed Under:

Explore