What Are the Steps to Set an IHome Clock?
The first step to setting up the iHome clock is selecting and adjusting the time zone. Press and hold the Time Zone button until the display begins to flash. Then, press the Select UP/FF or Select Down/Rew button until the preferred time zone setting is complete.
Press the Time Zone button again to exit the Time Zone mode. If Daylight Saving Time is applicable, adjust the DST switch located at the base of the unit. The next step is to set the time. Press down and hold the Clock Adjust or Time Set button for around two seconds and release. The button is either present at the bottom or top of the unit.
As soon as the time can be set, the display starts flashing. To change the hour, press and hold the Hour Set button. The display screen displays the current hour. To set the minutes, press the Sleep or Minute Set button. For some models, these buttons do not exist. In such cases, press the Select UP/FF or Select Down/Rew button until the screen displays the correct time.
Press the Clock Adjust or Time Set button to confirm the time setting on the clock. Listen for two beeps or wait for the display screen to stop blinking; this confirms the setting of the clock time.