What Are Some Common Problems With the Maytag Bravos Washer?
Common problems with Maytag Bravos washers include failure to start, water filling slowly, water leakage, failure of the door or lid to lock and overflowing. Other problems include stopping at mid cycle, loud noise and failure to drain and spin.
The Maytag Bravos washers come in different models, with each model experiencing unique problems. For example, the Maytag Bravos MTW6400TQo fails to start when the user control and display board is defective, or when the electrical power outlet is switched off. The washer water reservoir may fill slowly when there is low water pressure from the house supply, or when the water inlet valve is clogged. If the drain pump has a hole or crack, the MTW6500TQo model may experience water leakage. A defective door latch may also cause failure of the door and lid to lock.
The Maytag Bravos MTW6700TQo washer overflows with water when the power to the washer is shut off. The MTW6600TQ0 model may stop mid cycle due to faulty water inlet valve. The washer may fail to drain when the pump or hose is clogged or when the drain pump is worn out. Washer model MTW6300TQ1 becomes noisy when the tub seal and bearing kit is worn out. The MTW6600TBO model may fail to spin and agitate when the rotor assembly at the back of the tub is damaged.