What Are the Codes for Sanyo Televisions?
The most common remote codes for Sanyo televisions are 1045, 1062, 1095, 1380, 0049, 0097, 0110, 0004, 0268, 0012, 0108 and 0180. Many universal remotes can be programmed with Code Syncing, which does not require the input of a code.
To program a universal remote using Code Syncing, switch the TV on and press the TV button on the remote. Now press and hold the Code Search or Program Search button until the LED on the remote begins to flash. Press the Power button repeatedly (leaving 1 to 2 seconds in between presses) until the TV switches off. Immediately after the TV switches off press the Enter or Program button. Switch the TV back on with the remote, and check that all of the applicable buttons (such as Vol+ and Vol-) operate correctly. If the remote control doesn't have a Code Search or Program Search button, Code Syncing may still be an installed feature. To program a remote that doesn't have a designated Code Syncing button, without using a code, firstly switch the TV on. Press the TV button on the remote. Now press the Power or TV button repeatedly (leaving 1 to 2 seconds in between presses) until the TV switches off. Press the Power button again to switch the TV back on. Now check that all of the applicable buttons operate correctly.