How Do You Adjust the Weights on a TaylorMade R7 Driver?
To adjust the weights on a TaylorMade r7 driver, remove them from the bottom of the driver and insert the 10-gram weights closest to the hosel for maximum draw, closest to the toe for maximum fade, nearest to the face for low trajectory or furthest from the face for maximum trajectory. The process takes less than 10 minutes.
-
Remove the weights
Remove the four weights on the bottom of the driver. There are two yellow 2-gram weights and two red 10-gram weights that can be installed in multiple combinations.
-
Maximize the fade
To get more fade, install the 10-gram weights on the two outside positions closest to the toe of the club. For less fade, install one red weight and one yellow weigh on the outside position.
-
Maximize the draw
To get more draw, install the 10-gram weights on the two inside positions closest to the hosel of the club. For less draw, install one red weight and one yellow weight on the inside position.
-
Minimize the trajectory
To get a low trajectory, place the 10-gram weights in the two positions closest to the face of the club.
-
Maximize the trajectory
To get a high trajectory, place the 10-gram weights in the two positions furthest from the face of the club.