Adjusting the governor on a Yamaha golf cart begins with detaching a spring adjustment cable from the carburetor. Use a screwdriver to turn the bolts holding the governor clockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position of the governor cable. Adjust the gas pedal according to your needs.
Start by locating and detaching the carburetor from the governor. Turn the bolts that hold the carburetor in place clockwise if you want to increase the speed of your vehicle. Turning them anti-clockwise reduces the tension that reduces the vehicle’s top speed. Allow direct flow of power from the gas pedal to the carburetor by detaching the gas pedal cable from the carburetor and reattaching it to where you unplugged the original governor cable. Locate cable nuts holding the cable to the throttle lever and adjust the main cable nut in place using a screwdriver. Turn the nut anti-clockwise to elongate the cable, thus increasing the speed of the cart. You can reduce your vehicle's speed by turning the nut clockwise. Adjust the length of the gas pedal by removing the bolt on its shaft. After the adjustment, refasten the bolt and press the pedal. Make adjustments according to your speed needs.