Monthly Fire Extinguisher Tests and Inspections Required by OSHA. The following is an excerpt from OSHA regarding residential, commercial and industrial fire extinguisher tests, inspections, refills, recharges, hydrostatic testing, monthly inspections, annual inspections, and 6 & 12 year hydrostatic tests, inspections and required service ...
Here are three ways fire extinguishers need to be tested, and the schedule for each. 1. Visual Fire Extinguisher Inspections – Once per Month. According to OSHA [29 CFR 1910.157(e)(2), employers must perform a visual inspection on portable fire extinguishers at least once per month. This is also a good benchmark for homeowners to follow.
nctc.fws.gov/courses/programs/safety/fireext/FWS Fire Extinguisher Inspection...
PORTABLE FIRE EXTINGUISHER - ANNUAL INSPECTION / MAINTENANCE CERTIFICATION TRAINING. Equipment needed: inspections tags, tamper seals, weight scale. BASIS: National Fire Protection Association (NFPA) Part NFPA 10* Occupational Safety and Health Standards. 29 CFR Part 1910. Subpart “L” - Fire Protection Standard 1910.157
I would say yes the records are to show at least the last 12 monthly inspections in accordance with Section 18.104.22.168 of the 2010 NFPA 10. This means to me if records are kept on a tag attached to the fire extinguisher, the tags from the previous year must be kept on file or on the fire extinguisher to comply with Section 22.214.171.124.
Selection and Distribution Requirements. OSHA also makes some fire extinguisher selection and distribution requirements. An employer must: Select and distribute the extinguishers based on the types of anticipated workplace fires and on the size and degree of hazard that would affect their use.29 CFR 1910.157(d)(1)
A fire extinguisher inspection is conducted monthly to ensure that fire extinguishers are in good working condition. Fire extinguisher maintenance and monitoring is covered under the inspection and is conducted by external professionals or an organization’s own safety officers as part of an overall fire safety strategy.
The employer may use uniformly spaced standpipe systems or hose stations connected to a sprinkler system installed for emergency use by employees instead of Class A portable fire extinguishers, provided that such systems meet the respective requirements of 1910.158 or 1910.159, that they provide total coverage of the area to be protected, and that employees are trained at least annually in ...
Monthly Inspections. The NFPA requires inspection of your extinguisher every month. During this check a Cintas technician will visually inspect the unit, clean, check pull pin as well as provide documentation of the inspection. Annual Maintenance. An inspection of each of your extinguishers is often required by NFPA or the local AHJ.
For employers who write into their emergency action plan and fire prevention plan (covered in 29 CFR 1910.38 and 29 CFR 1910.39, respectively) that all employees will immediately evacuate the building in case of a fire and that no one will use an extinguisher, neither education nor training is required in portable fire extinguisher use.
Portable Fire Extinguisher Six (6) Year Tests, Inspections and Maintenance. Every 6 years, stored pressure fire extinguishers that require a 12-year hydrostatic test (e.g. dry chemical extinguishers) must be emptied and proper maintenance procedures performed [see NFPA 10(98), Sec. 4-4.3].