Sliding Compound Miter Saws. The big difference between a sliding compound miter saw and a stationary compound miter saw is that the sliding saw is made with a rail (or rails) which allow you to slide the saw head forward and backward while cutting.
Sliding Saw. A sliding miter saw gives you the ability to cut wider pieces of wood. I highly recommend going for a sliding miter saw if you have the opportunity. This is because it is tiring to flip the piece over every time you cut a board that is too wide. Conclusion.
A non-sliding miter saw is all you’ll need for 90 percent of interior trim work. If you only have a few hundred dollars to spend and can sacrifice the wide cutting capacity of a sliding saw, we recommend buying a non-sliding compound miter saw instead. You’ll get a miter saw capable of top-quality work.
A sliding miter saw is very similar to a compound saw in that it also makes both miter and bevel cuts. The big difference is in the width of the material they can handle. The key to this difference is in one word: sliding.
General overview: Sliding vs. non-sliding miter saw. Like we said, the principal advantage of a sliding miter saw is that it allows you to cut wider boards. For a example, a 10” non-sliding saw will allow you to cross cut a board up to about 6” wide, while a 12” non-sliding will work for 8” boards (standard 2x8’s).
A miter saw (also known as a "mitre" outside of the United States) is a saw used to make accurate crosscuts and miters in a workpiece by pulling a large backsaw or a mounted circular saw blade down onto a board in a quick motion.
Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.
A sliding miter saw has all the features of a compound miter saw, but similar to a radial arm saw, this allows you to move the blade forward and backward. This provides the potential for cutting at an increased length.
The main benefit of a non sliding miter saw is the ability to create compound miter cuts by using both axes of the saw at the same time during cutting. Because a compound saw has a range of abilities it, it is a very flexible saw that can be used in a range of applications.
The new Hitachi C12RSH2 sliding dual compound miter saw is equipped with a compact slide system that requires zero rear clearance. Fixed rail system allows the saw head to smoothly glide along the fixed rails, eliminating the rear clearance that other sliding miter saws require.