www.reference.com/science/calculate-volume-room-81bd0b90879b88c7

To calculate the volume of any space, measure the length, width and height of the room. Multiply the length by the width and then by the height. Measuring the volume of non-rectangular rooms is a bit more complicated, requiring the division of the room into measurable sections.

www.reference.com/article/calculate-number-gallons-pool-6fa2c69f0ed2d867

The way you calculate the number of gallons in a pool depends on the type of pool you have. This is the general formula for calculating volume in gallons: length x width x depth x 7.5.

www.reference.com/world-view/volume-pipe-calculated-7dbff16ecfa71fa2

The volume of a pipe is found by multiplying pi by the height by the radius squared. This is the common equation for a cylinder.

www.reference.com/article/pool-water-removal-work-5650fd70c9090b22

Removing water from a pool properly involves using a pump and a hose to drain water into plumbing fixtures connected to a sewer. Discharging swimming pool water into public space is illegal in many states.

www.reference.com/article/calculate-volume-round-tank-acb3983b7cea057

If the round tank is spherical, the radius of the interior space must be measured; the radius is one-half of the diameter. The volume is equal to the radius cubed multiplied by pi multiplied by 4/3.

www.reference.com/article/calculate-volume-cylinder-1b85310bce3bbbae

Calculate the volume of a cylinder using the formula pi x r^2 x h. You need to know the value of pi, the value of the radius of the circle at the end of the cylinder and the value of the height of the cylinder.

www.reference.com/world-view/can-pool-filled-well-water-170c9acaabe32f3d

It is possible to fill a pool with well water, and in some cases it is the most affordable option. Filling up an average-sized pool with a water hose usually costs about $80-$160 dollars, depending upon the geographical location.

www.reference.com/science/volume-one-drop-water-8164b654ac639858

A drop of water is equal to 0.050 milliliters. The unit used to represent a drop of water is 1 gtt metric.

www.reference.com/article/calculators-measure-pipe-volume-198da2b2fd6b18b8

There are online calculators to find the volume of a pipe on nCalculators.com and HandyMath.com, as of 2015. Both websites display the volume of a pipe in different units of measurement.

www.reference.com/science/calculate-liquid-volume-cylinder-73473b2dd37f4dfc

Calculating the liquid volume of a cylinder involves multiplying the height by the area of its base or top. Input the number values correlating to the parts of the cylinder in the equation, either using manual or electronic calculation. Converting to the same units before multiplying results in an a