Web Results


Q: What is the average cost for a valve and piston rod replacement job. I thought it was the lifter but now they say its valve.


The average cost of a valve job is highly dependent on how many valves the car's engine has and what type of engine it is. A valve job for a 4-cylinder engine costs approximately $85 per valve repaired. The purpose of a valve job is to resurface the poppet valves and their seats, which control the flow of air and fuel to move the pistons.


HomeAdvisor's Plumbing Cost Guide provides estimated quotes to install, replace, fix or inspect home plumbing including slab leak repair, rough in work, fixing leaking pipes, water pressure regulator or p trap replacement, rerouting pipes, burst main water valve and stack repairs and more. Calculate average prices per fixture and get free plumbing estimates.


V6 Valve Job Shop Estimate - Reasonable? After being in the shop for a while the mechanic has determined that the rough idle and lack of power at high rpms is due to a burnt exhaust valve. He said it will cost $2700 to do the whole job incl all parts, gaskets, and labor and will take at least a week.


A valve job typically costs in the $1000 range. So, I am not sure what to make of that... An engine will not overheat from leaking valves. A valve job includes removing the cylinder head and taking it to a machine shop where they grind new seats and grind the valves to match them so that they seal.


I have a 2004 Forester XT (Turbo). It has 101,000 miles. I have a solid check engine light and a flashing cruise control light. After a $300 diagnostic, he says I have a "Dead Miss" in Cylinder 2. He wants to do a valve job. Pull engine. Remove heads. Send heads to machine shop. Replace...


well, my (girlfriends) KX250F has managed to devour its left intake valve in just a matter of months. She is a novice rider and doesnt ride it that hard, but that is neither here nor there... my question is how much does a valve job usually run? time to fix her up and ship her out in time for x m...


Whether the job involves routine maintenance or more involved repairs, AAA can provide you with an estimate of the cost. Included in the estimate are breakdowns for parts, labor and the member discount available at all AAA Approved Auto Repair facilities. To generate an estimate, simply provide the information below and select the desired ...


Valve Job or Adjustment. How much does an ATV valve job or adjustment cost. You should expect to pay about $100-250 for either. If you want to do it yourself, a set of valve’s will only cost you $5-15 on Amazon or cycle-parts.com, but you may need a shim kit as well, which could run $50-70 (shim kit is reusable).


Always Ask For A Estimate First; Commonly known as a strip and advise cost to repair. Exhaust valves and springs often need to be replaced. Valve guides and/or seats may have to be replaced. The head may be warped or cracked, requiring additional repairs. The list of things included in a “complete” valve job will vary from job to job. Most ...