Web Results


An NPT connection stands for National Pipe Thread, and the connection utilizes a male threaded adapter that connects with a female threaded adapter to create a seal. The connection works by the male adapter stretching out the female fitting to create a strong enough force to hold the two pieces toge


NPT, which stands for National Pipe Thread, is a type of fitting used on pressure systems in the United States and Canada. NPT fittings operate by forming a tight seal between the male and female connectors.


Find an NPT chart that shows threads per inch and drill size by going to the national pipe taper threads page on The Engineering Tool Box web site and scrolling down to the chart. In addition to threads per inch and drill size, this chart includes five other categories of information.


Fixed weight numbering systems describe the length of thread required to achieve a predetermined weight; fixed length systems provide the weight of thread required to achieve a predetermined length. Finer thread receives a smaller identifier in a fixed weight system and a larger number in a fixed we


The main difference between a British Standard Pipe Taper and a National Pipe Taper threads is that the NPT thread have a 60-degree included angle compared to the 55-degree included angle on the BSPT thread. NPT threads also have flattened peaks and valleys called a Sellers form, while the BSPT have


Using National Pipe Gages (NPT, NPTF, NPS) is really pretty simple, if the Go thread plug for NPS (straight) goes in to the threaded hole and the NoGo does not then the product is usually considered within the tolerance limits and


NPT and NPTF Thread Gages. Pipe Thread Gages can be very confusing. Even experienced users who have used Straight Thread gages may be confused by the use of tapered pipe thread gages. Please see see the link below for a PDF to explain the basics of NPT and NPTF thread gages. NPT-NPTF-2019.pdf.


Using NPT thread gauge is actually pretty simple if the Go thread plug gauge for NPS goes into the threaded tear and no-go doesn’t then the application is normally considered within acceptance limits and tolerance.


Threaded Plug Gauges for NPT Pipe Threads with Calibration Certificate Ensure the accuracy of internal NPT pipe thread measurements— these gauges come with a certificate of calibration traceable to NIST that states they’ve passed a test for accuracy. A notch on the handle indicates when the threads you’re checking are in tolerance.


When the L1 plug is at minimum notch, the 6-Step Gage must go between the "MN" and "MNT" notches. Click here to view more information about our NPT Thread Gage. Click here to learn more about the basic use of NPTF 3-step & 6-step gages . Click here to view more information about our NPTF Thread Gage