ARTICLES

Solder electrical connections by protecting the work surface, preparing the soldering iron, mechanically connecting the materials and soldering the joint. Avoid touching the end of the soldering iron, as it is very hot.

www.reference.com/article/use-soldering-iron-aece4b0c838a1120

To use a soldering iron safely, wear eye protection, such as safety goggles or glasses, at all times. Solders emit strong fumes that can be toxic, so work in a well-ventilated area to prevent buildup. Never hold the wire...

www.reference.com/article/can-use-soldering-iron-safely-cb499aab9162d93b

A Cold Heat soldering iron is a tool that melts solder. It uses batteries, unlike typical soldering irons that plug into the wall, and cools down after use.

www.reference.com/article/cold-heat-soldering-iron-3fb900abdc01043a

SIMILAR ARTICLES

Proper use of a home air quality test kit usually involves following the kit's instructions for collecting surface or airborne samples using the materials included in the kit and mailing the samples to the specified labo...

www.reference.com/article/use-home-air-quality-test-kit-6640dd9c95070dec

DuPont Joint Adhesive is designed to bond DuPont Corian solid surface materials to each other or to DuPont Zodiaq quartz surfacing material. DuPont does not approve Joint Adhesive for any other purpose, including bonding...

www.reference.com/article/uses-dupont-corian-adhesive-12b0cce1a3e9843c

Rotating a screw advances a spiraled incline into a surface. The head of a screw functions as a lever, while its threading is just a long incline that has been wrapped around a vertical shaft.

www.reference.com/article/screw-work-f78b9838adef0f52

Pneumatic drills, which are also known as pneumatic hammers and air hammers, use compressed air to operate, and they are used to dig holes, cut surfaces and carve and chip away metal, stone and other materials. The pneum...

www.reference.com/article/pneumatic-drill-work-10f0948a49a2a287