If the round tank is spherical, the radius of the interior space must be measured; the radius is one-half of the diameter. The volume is equal to the radius cubed multiplied by pi multiplied by 4/3.
To find the gallons of fluid that a tank can hold, first find the volume of the tank. Then, convert the volume of the tank into gallons.
Depending on whether the tank is cylindrical or rectangular, the volume of a water tank is found using the formulas (pi x radius^2 x height) or (length x width x height) respectively. For a cylindrical tank's volume, the measurement for the radius is equal to one-half the circular base's diameter, a
To calculate the volume of any space, measure the length, width and height of the room. Multiply the length by the width and then by the height. Measuring the volume of non-rectangular rooms is a bit more complicated, requiring the division of the room into measurable sections.
Calculating the remaining amount of oil in a tank is derived from the tank's capacity, divided by the height of the tank and multiplied by its depth. Before making this calculation, the depth, height and capacity of the tank must be accurately measured.
Determining the volume of a fish tank requires fairly simple math calculations that can be determined by taking the tank's measurements. For tanks that come in basic shapes, such as spheres or rectangles, the process is easier than irregular shapes.
The volume of a pipe is found by multiplying pi by the height by the radius squared. This is the common equation for a cylinder.
Calculate the volume of a cylinder using the formula pi x r^2 x h. You need to know the value of pi, the value of the radius of the circle at the end of the cylinder and the value of the height of the cylinder.
There are online calculators to find the volume of a pipe on nCalculators.com and HandyMath.com, as of 2015. Both websites display the volume of a pipe in different units of measurement.
Calculating the liquid volume of a cylinder involves multiplying the height by the area of its base or top. Input the number values correlating to the parts of the cylinder in the equation, either using manual or electronic calculation. Converting to the same units before multiplying results in an a