The parts of a residential well water system include the pump, pressure switch, pressure tank and distribution system. When these parts work together, water flows from the well to the taps inside the home. More »

Some backyard waterfall design ideas are a stony paradise design that includes a waterfall at the center of stones and a modern wonder design that features a waterfall running down concrete stairs. There is also a spa wa... More » Home & Garden Outdoor

The pressure switch to a well pump may shut down a well or cause the water not to flow, especially if both the switch and a pressure tank are affixed to the system. Both parts can cause an over-circulation of water, whic... More »

To install a water well pressure tank, cut the electricity to the well's pump, drain the tank, release the pressure from the lines, remove the old tank and install the new model. The process requires some mechanical abil... More »

To treat well water with bleach, use a pump to clear the well of any dirty or cloudy water, and then add chlorine bleach to the well. This bleach is not found in the supermarket and must obtained from a professional who ... More »

The residential water well owner should set the pressure in a bladder tank at 2 pounds per square inch lower than the cut-on pressure for the well pump. A tire pressure gauge placed on the valve at the top of the tank ca... More »

To fix low water pressure in a well water pump, inspect the system to find out if there's a problem with hard water buildup that's causing the decline in pressure, advises Scale buildup can increase the fr... More »