Web Results

www.reference.com/article/thick-10-gauge-steel-8bce6a6c42c5d247

Ten-gauge steel is 0.1345 inch thick. This refers to normal steel, as the numbers change for galvanized steel, stainless steel, and sheet and plate steel.

www.reference.com/article/thick-20-gauge-steel-7e1933196d61a5c3

Standard 20 gauge steel is .0359 inches thick. Galvanized 20 gauge steel is thicker at .0396 inches and 20 gauge aluminum is thinner at .0320 inches thick. The thickness of a piece of steel is also indicative of its maximum bending capacity.

www.reference.com/article/thick-12-gauge-steel-9c58a90de8b273b1

This answer depends on the geographic location of the asker. In the United states, 12-gauge steel is 0.1094 inches or 2.78 millimeters thick. In Great Britain, 12-gauge steel is 0.109 inches or 2.769 millimeters thick.

www.reference.com/article/thick-11-gauge-steel-37189fdb276ae2ef

Standard 11 gauge steel is 0.1196 inches thick, and galvanized 11 gauge steel is 0.1233 inches thick, according to the University of North Carolina at Chapel Hill. A full list of steel gauges and their thicknesses are listed in the "How Many? A Dictionary of Units of Me...

www.reference.com/article/thick-16-gauge-steel-bbe2ae631f059fd8

The thickness of a sheet of 16-gauge steel is approximately 0.05928 to 0.065 inches. The thickness varies depending on the type of steel and the gauge standard. When measuring the thickness for galvanized, standard and stainless steel, the Manufacturers' Standard Gage i...

www.reference.com/article/sheet-steel-gauge-chart-7d029d39cce78cf6

A sheet steel gauge chart is a chart or table that compares the standard or average weight and thicknesses of different steels and metals in both sheet and wire form.

www.reference.com/article/read-metal-gauge-thickness-chart-d96cf8184f4b3c6b

To read a metal gauge thickness chart, determine the type of metal and the metal's gauge. Locate the gauge in the first column. Follow that row to the right to the column that indicates the metal's type. That column also features the pounds per square feet of the partic...