Web Results

www.reference.com/world-view/calculate-square-meters-dccbea55a9ae63c1

To calculate square meters in a given space, you can measure the number of meters on each side and multiply them. Alternatively, if you know the number of square feet, you can convert that figure into square meters. You may want to use a calculator to do the math involved.

www.reference.com/science/convert-meters-square-meters-e13076a5a1c0da10

Meters are unable to be converted into square meters. Meters only refer to the length of a given object, while square meters are used to measure the area of an object.

www.reference.com/science/many-square-feet-lot-5911be93ef0f466d

Since lot sizes vary across the United States and even between individual neighborhoods within cities, there is no uniform number of feet in a lot. Minimum lot sizes are set by zoning rules established within municipalities.

www.reference.com/world-view/work-out-measurements-room-square-meters-e0f6a44b96835a7d

To find the measurement of a room in square meters, first measure the length and width of the room in meters. Then multiply those results together; the answer is the area of the room in square meters.

www.reference.com/science/many-feet-square-foot-d3b8cc363e8e2a65

A square foot equals the area of a square with each side equal to one foot. It is not possible to calculate feet in a square foot because these are two different types of measurements; a square foot denotes a unit of area, and feet is a unit of length.

www.reference.com/science/1-000-square-feet-36733abb04d3239f

One-thousand square feet is a size that describes the area of a surface, such as a floor or parcel of land. An area that occupies 1,000 square feet can come in a variety of shapes.

www.reference.com/science/big-1-000-square-feet-ddaa332a161b33c5

One-thousand square feet is approximately one-fiftieth the area of an NFL standard football field. It is also equivalent to the area that would be covered by 1,540 sheets of 8 1/2-inch by 11-inch paper laid edge to edge.

www.reference.com/article/figure-square-feet-edb090c9dfcc49d

To figure out the square footage of an area, you will need a measuring tape and possibly a calculator. Measure length and width and then multiply the two together. The process should take less than five minutes.

www.reference.com/article/many-bricks-square-meter-1f978a8b2a387f0

Brick sizes vary, but for standard U.S. modular bricks laid as face brick in a wall, there are 50 bricks in a square meter. This calculation assumes that 3/8-inch mortar is used.

www.reference.com/science/many-square-feet-mile-8a8c4c4daa5f8fd4

A square foot is a measure of surface area, and a mile is a measure of length. There are 5,280 feet in a mile and 27,878,400 square feet in a square mile.