Web Results


Removing spray paint from wood can be a simple process involving sanding or a medium-sized project using chemicals depending on whether the entire wood will be painted to cover the affected area, or a little effort will be employed to restore the wood to its original state. There are various ways of


Spray painting is easy. Simply clean, sand and prime the surface as necessary before evenly coating it with paint. Use a sweeping motion while spraying, moving left to right or up and down to give the surface an even, smooth coat of paint.


To spray paint a house, inspect the exterior for any damage, clean the outside surfaces, make any necessary repairs, and mask off all areas that are not being painted, and then apply the pain. If you are painting wood, follow up the spraying with a roller to create a seal.


Spray paint metal by cleaning the object with a wire brush, applying a primer, and then adding two thin coats of spray paint using smooth back-and-forth movements about 10 inches away from the object. Wear a mask to avoid breathing in fumes, and wear gloves to protect your hands.


Krylon Fusion is a spray paint that is specially designed to paint on plastic. It provides a long-lasting bond on plastic surfaces without flaking off.


Glass can be spray painted with acrylic spray paint as long as it is treated with epoxy afterwards to set the spray paint and prevent chipping. Many stores carry paint that is specifically designed for use on glass and gives the painted item a frosted look. Standard spray paint designed for use on o


Some tips for spray painting on plastic surfaces include cleaning the plastic thoroughly, abrading the plastic and applying primer before painting. Also, spray paint from an appropriate distance, apply the paint evenly, and paint on a test surface before doing the actual job.


To remove spray paint, apply a chemical remover, such as paint thinner, to the sanded surface, scrub with a hard-bristle brush, and rinse with a pressure washer. Spot treat stubborn paint with a chemical remover and a steel wool brush.


Sanding, cleaning, priming and painting are the four basic steps to spray-painting furniture. Depending on the furniture material, you may need to use a specific type of primer or grade of sandpaper. An additional weatherproofing step is necessary for wood-based furniture, including reclaimed timber


Tips for spray painting furniture include starting with a clean, smooth surface, removing hardware, priming the surface, choosing appropriate conditions and maintaining consistent spraying. Using several thin layers of spray paint produces the best results on furniture.