Electrical wires must first be stripped, then twisted together and covered with a wire nut in a junction box in order to be spliced together properly, according to Home Depot. Splicing joins two or more electrical wires ... More »

To wire an electrical outlet to a wall switch, turn off the power, install the new switch box, run a new cable from the switch to the outlet, disconnect the tab connecting the receptacles on the outlet and connect the wi... More »

www.reference.com Home & Garden Home Maintenance Electrical

It is possible to splice a new wire into an existing electrical system, and it is a fairly easy process. It is important that all safety steps be taken to protect from any electrical discharge during this process. More »

Install a junction box by attaching the box to the studs or ceiling joist with screws, knocking out the plugs, installing cable clamps, pulling the wires into the box and making the splice. Attach the cover to the box. E... More »

www.reference.com Home & Garden Home Maintenance Electrical

The Home Depot provides a chart that explains the differences in wire nut, more commonly known as wire connector, colors on its website. The chart explains the size of wire that can be used in these wire nuts and the num... More »

To wire a hot tub, contact a local inspector, inspect the service panel, run the wiring, connect the hot and neutral wires, wire the disconnect box and connect the hot tub wiring. Have your work inspected by a licensed e... More »

www.reference.com Home & Garden Home Maintenance Electrical

To wire a breaker box, attach the grounding wire to the metal bar with setscrews, remove 1/2 inch of insulation from the wires, insert them into the circuit breaker, and push on the circuit breaker to lock it into place.... More »