Web Results


Soil Test and Soil Boring Test : Soil Test and Soil Boring Test is an essential part of foundation design. The enables engineer to design a safty foundation by foundation engineering method and construction cost savings. Normally the price of soil boring test should be between 0.1 – 0.5 % of the total construction cost.


over 60,000 sf: 1 boring for each 15,000 sf plus 1 boring for each 1,000 ft of perimeter Add 1 boring for each special installation such as chimney, elevator pit, concentrated machine load, extra deep basement, high sign, etc. unless it occurs where a typical boring occurs.


AsktheBuilder.com: Soil strength and quality are extremely important when building a new home since most house foundations contact soil, not bedrock. Not all soils are the same, so it is vital you get a valid soil test and inspection.


The type of foundation built on sandy soil differs from that built on a bed of rocks. Soil testing information can also be used to find the best location for a septic system or well, or to address drainage issues. Most geotechnical engineering firms provide a range of services, including lab testing, soil analysis and technical support.


A soil boring test are conducted for different reasons, including to determine good drilling locations and depths for wells and basements. The soil boring tests are performed by excavating soil from an area.


In case of a pile foundation, the depth of boring should extend into the bearing stratum. Methods of Boring for Soil Investigations. The different methods of boring are: Auger Boring. The examination of the soil for ordinary buildings can be done by a post hole auger. The auger is held vertically and is driven into the ground by rotating its ...


Geotechnical investigations are performed by geotechnical engineers or engineering geologists to obtain information on the physical properties of soil earthworks and foundations for proposed structures and for repair of distress to earthworks and structures caused by subsurface conditions. This type of investigation is called a site investigation. Additionally, geotechnical investigations are ...


A soil engineer is someone who conducts soil testing and advises on preventive solutions for problems that may arise from expansive soil, saving the homeowner future difficulties. A soil engineer can be contracted through the architect or builder, or you can contact the engineer directly. It’s ...


Subsoil conditions are examined using test borings, provided by soil engineer (geotechnical). Number of borings and location of borings depends on building type and site conditions. Typically for uniform soil conditions borings are spaced 100-150′ apart, for more detailed work, where soil footings are closely spaced and soil conditions are ...


Soil Borings. All raw land sites require geotechnical investigations for self-supporting, guyed tower, and monopole foundations. Most soil borings are obtained by using drill rigs with conventional rubber tires capable of accessing rough terrains. Some locations require site clearing and an all terrain rig, which will add to your cost.