Web Results

homeguides.sfgate.com/height-should-shower-valve-spout-set-at-84381.html

When determining the height of your shower head and control valve, always check your local building codes first. If there are regulations governing installation, your dilemma is resolved for you ...

www.hunker.com/13400911/what-height-should-a-shower-valve-and-spout-be-set-at

Shower valve and spout height is a matter of personal preference when you're building or retrofitting. Place the controls so that all users can easily access them. Standard height for the shower valve -- the handle that turns the shower on -- can be roughly waist high, 36 inches above the shower floor, or as high as 48 inches.

www.plumbersforums.net/threads/shower-valve-height.79431

I find if you have a shower valve fitted over the bath then 1300mm off the floor is a good height. If valve is over a shower tray/in a cubicle then around 1m from top of shower tray. Last edited: May 15, 2015

www.ridgidforum.com/.../28359-shower-valve-rough-in-height

I was just curious if there is a standard height on the books for tub spouts, shower valves and shower heads. I usually rough the spout in at 4" above the tub rim, shower valve 10" above the spout, and the head at 7 ft from the floor.

legalbeagle.com/7844726-ada-shower-valve-measurements-requirements.html

The minimum height for the shower controls area is 38 inches above the floor. The maximum height above the floor is 48 inches. The architect is given a 10-inch leeway to place the controls. As long as the controls are within 38 to 48 inches off the floor, the stall is in compliance.

www.hunker.com/13400897/height-of-shower-fittings

The height of the valve for a shower depends upon whether you need it for a shower stall or a shower set in a bathtub. Showers set in bathtubs require lower valve heights because the valve must connect to both the shower and the bath tap. A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units.

showermaestro.com/correct-height-of-shower-valve

If your shower is also a bathtub, ensure that the valve is low enough for bathers to use it, but you can place it around 45 inches from the ground if the shower does not include a bathtub. Check Local Building Codes. Looking up local building codes is a great starting point if you want to install your shower valve at the right height.

www.plbg.com/forum/read.php?1,339001

How high should the shower valve be installed at? Author: sum (FL) My plumber installed the shower valve at 30" above the bare concrete floor. I figure once I installed the shower pan and the sloped tiled floor, it would be 26" above my feet.

www.finestbathroom.com/shower-head-height

Note: To get the shower head height, measure from the floor up to the vertical center of the shower arm where it meets the wall. The standard and best a shower head is also depends on the shower head type you use. So let’s have a look at the various types of shower heads and their different height requirements next.

www.hunker.com/13401000/how-high-should-a-shower-head-be

The industry standard for the height of a shower head is 80 inches above the floor of the bath. This is 6 feet, 8 inches, which is suitable for most people of average height, and even usable for those who are taller.