Web Results

www.hunker.com/13401000/how-high-should-a-shower-head-be

The industry standard for the height of a shower head is 80 inches above the floor of the bath. This is 6 feet, 8 inches, which is suitable for most people of average height, and even usable for those who are taller.

www.ehow.com/facts_7106115_height-put-shower-head.html

Accessible showers must provide a shower head on a flexible hose that is at least 60 inches long and usable as either a fixed or hand-held shower head. Some ADA compliant showers have a vertical bar that allows the fixed height to be set as desired and others include an additional shower head set at 60 inches.

www.southernliving.com/home/bathroom/rainfall-shower-head-size

Installing a rainfall shower head is a relatively low-lift and low-cost update that can take you one step closer to that spa bathroom. But before you rush to buy a new shower head and hire a handyman to do the installation, there are a few things you need to consider about rain shower heads, most importantly the size.

www.finestbathroom.com/shower-head-height

The standard shower head height is 80 inches (6′ 8″ feet) from the floor to the shower head. It can range from 72 inches to 96 inches according to personal heights and location. However its commonly installed at 78″ or 72″ inches by many builders and plumbers.

www.contractortalk.com/f9/showerhead-height-32062

There is no standard or uniform shower head height that builders must conform to. The height of the shower head above the floor measures approximately 78 inches (6-feet, 6 inches). 07-13-2012, 08:37 AM

www.dimensions.guide/element/shower-heights-clearances

Shower heads are located at a standard height of 80” (203 cm), but can be set at a minimum height of 72” (183 cm) if desired. Shower controls should be placed at a height 40”-50” (102-127 cm) above the shower floor and out of direct line of the water path to avoid being caught in extremely cold or hot water when operating.

www.burnhamnationwide.com/final-review-blog/ada-shower-requirements-we-answer...

For adjustable-height shower head units that attach to a vertical slide bar, the bar should not get in the way of the person being able to reach the grab bars. If the unit is the type that can be used as a fixed or handheld shower head, the hose should be a minimum of 59 inches long.

www.bradleycorp.com/mediamanager/view/20169/3931_ADA_Design_Guide.pdf

required in accessible toilet or shower stalls. Showers ADA Compliance for showers requires a hand-held shower head with 59" (1500 mm) hose that can be used both as a fixed-position shower head and as a hand-held shower. Shower controls must require less than 5 lb of pressure with no grasping. Bradley offers several options for accessible showers.

homeguides.sfgate.com/height-should-shower-valve-spout-set-at-84381.html

When determining the height of your shower head and control valve, always check your local building codes first. If there are regulations governing installation, your dilemma is resolved for you ...

legalbeagle.com/7844726-ada-shower-valve-measurements-requirements.html

The minimum height for the shower controls area is 38 inches above the floor. The maximum height above the floor is 48 inches. The architect is given a 10-inch leeway to place the controls. As long as the controls are within 38 to 48 inches off the floor, the stall is in compliance.