Web Results

www.ocm.co.jp/en/han_info/05_01.pdf

ROLLER CHAIN ROLLER CHAIN ROLLER CHAIN DIMENSIONS H UNIT Upper:inch Beneath:mm Chain No. Pitch Roller Diam. Width between L.P. Link Plate Pin Diam. Pin Average Tensile Strength Max. Working Load Weight P D W H T d L Lb/kgf Lb/kgf Lb/ft kg/m 25 0.25 0.13 0.126 0.23 0.03 0.091 0.307 1058 154 0.087

redboarchain.com/pages/size-charts-product-info

All Red Boar Chain chains are solid roller, #120 and larger are solid bushing solid roller ensuring a longer wear life than split roller and split bushing chain. Ideal for a wide range of loads, speeds, and designs. Also Available in Nickel and Dacromet Coated Roller Chain. Double Strand Roller Chain Spec Chart

www.rollerchain4less.com/Roller-Chain-Size-Chart_ep_86-1.html

Size Chart / How To Measure Roller Chain. The most important roller chain dimensions to measure is the Pitch (P), Roller Diameter (d1) and Inner Width (b1). These three dimensions will help you determine what roller chain size you have. Below are the roller chain size charts for single, double and triple strand ANSI roller chain.

www.rollerchain4less.com/How-To-Measure-Roller-Chain_b_12.html

Below are roller chain size charts for ANSI roller chain in single, double and triple strand. It's recommend to use calipers to accurately measure the roller chain. There are many chains that have the same pitch, but have different roller diameters and widths. Single Strand ANSI Roller Chain Chart

www.ametric.com/images/document/chains-roller.pdf

Standard Metric Roller Chain Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer. 1-005 - 00825 Inner Link Outer Link (Riveted Conn. Link) Conn. Link with Spring Clip Conn. Link with Cotter Pins Half Link with Cotter Pin Offset Link Roller Link or Inner Link - Used for replacement of dam-aged ...

taylormhc.com/wp-content/uploads/2016/11/Sprocket-Engineering-Data.pdf

SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS HORSEPOWER RATINGS SPROCKETS American sprocket manufacturers have adopted 4 specific types of sprocket construction styles as American Standards.

www.accentbearings.com/pdf/cross_morse_roller_chain_bs_ansien.pdf

British Standard Precision Roller Chain Conforming to ISO 606 and DIN 8187 14 Cat No.† Pitch P Inside Width b min mm Roller ... Available all sizes of chain. ... chains for maximum performance Part Ref. 79 Roller Unit (Inner Link) Available all sizes of chain to extend chain length or manufacture of special build chains. Part Ref. 77 ...

www.usarollerchain.com/roller-chain-size-chart-s/4869.htm

Follow our easy-to-read roller chain size chart for your industrial applications. Confusion doesn't rule the day when roller chain sizes are detailed in every dimension possible at USA Roller Chain. Compare diameter, width and thickness as you find drive chain sizes that move your machinery in the right direction.

www.ametric.com/images/document/Chain-RollerANSI-Standard.pdf

American Standard (ANSI) Roller Chain (All dimensions in inches) Triple Roller Chain ANSI Chain No. Average Strength(lbs) ANSI Stan-dard Weight lbs/ft C.L. Width Extension k Ametric® Chain No. ISO No. Pitch p Between Inner Plates b1 Roller Diameter d1 Chain Width l Connector links are wider than chain sections. Overall dimensions may vary ...

www.tsubaki.ca/pdf/E206-236_Sprocket_Technical_Section.pdf

STANDARD SERIES ROLLER CHAIN SPROCKETS HEAVY SERIES ROLLER CHAIN SPROCKETS Chain Data For All Sprockets Double and Triple For 4 or more Strands Strand Chain Size Pitch Roller Width Roller Dia. t 2 M2 M3 t4 M2 M3 M4 M5 M6 M8 K Machining Tolerance on “t” and “M” on T HR Hot Rolled Tolerance Single Strand t 1 and T HR 25 35 41 40 50 60 80 ...