Web Results


Compare the costs: A plumber will charge $2,800 to remove the old bathtub and fixtures and install a new receptor and wall surfaces. The cost will be considerably more if you decide to upgrade the enclousure material to a solid surface or ceramic tile.


Replacing a bathtub with a full walk-in shower, is affordable, and aesthetically pleasing addition which will also increase the value of your home. ... Remove & replace moldy shower caulk ...


The floor of your shower (aka the shower pan) has a lot to say about the style and cost of your tub-to-shower remodel. You have a choice of two basic types of pan: one corrals water with curbs that you step over as you enter; the other is curbless. Shower pans with curbs form a complete enclosure to contain water spray and channel it to a drain ...


How to Remove a Tub to Install a Shower. When you're ready to give up your old and dated bathtub and install a more modern stand-alone shower in your bathroom, the first step is removing the old tub.


And finally, you'll learn exactly how to install the tub, hook up the plumbing, seal the drain with silicone drain sealant, and secure the tub with the wall with bathtub screws. Category Howto & Style


Use a tool designed for tub drain removal, also called a tub drain extractor, to remove the drain flange. Use the screwdriver to disconnect and remove the tub's waste and overflow valve cover. Remove the tub spout since this will be on a portion of the wall you'll be cutting away. Some spouts have a setscrew that holds them in place.


Removing a standard bathtub and having a shower with a seat installed is a very sensible idea. It is so much safer to access and to keep clean, for persons of any age. However, if you do not have any previous experience with carpentry, plumbing, or finishing, it is not an average diy project.


Tub-Shower Combo. The price to put in a tub-shower combo is similar to the cost to install a bathtub, which averages $2,900.This includes $400 to $2,000 for the bathtub and $500 to $1,000 for the surround, plus about $1,000 for installation. You might consider this type for the following reasons:


According to HomeAdvisor, the average cost to install a tub is $3,000, while it’s an average of $6,000 to build a walk-in shower. Don’t let the price tag of a walk-in deter you. Don’t let the price tag of a walk-in deter you.


The first step to getting started is to remove the old bathtub as well as any tub framing that is in place. The process can vary wildly depending on installation methods used.