Web Results


The density and weight of lumber varies with the water or moisture content in the wood. Typical weights for green, kiln dried and pressure treated lumber boards are indicated in the tables below. Note that nominal dimensions are not the same as actual lumber dimensions. Green Lumber Boards


The weight of the lumber is automatically returned in pounds. Variations in the Weight of Wood. The weight of pine, green oak, and pressure treated can vary greatly from board to board. This calculator assumes that it has a fairly high moisture content. Exposure to excessive moisture for tree sawn and engineered lumber will also temporarily ...


The weight of pressure-treated lumber varies depending on the size of the boards. A 2-by-4-inch lumber board that is 8 feet long has a weight of 17 pounds. A 4-by-12-inch board that is 16 feet long weighs 224 pounds. Pressure treatment is a way of preserving wood to extend its useful life and increase its durability.


*APPROXIMATE WEIGHT CHART* ... IMPORTANT NOTE: Lumber & plywood weights can vary widely depending on the time of year the material was produced and the location of the producing mill. The above listed weights are approximates and are intended as a general guideline only. Actual shipping weights should be verified at the scales.


Commercial Lumber Sizes Chart Table. The following data is standard reference and size data for commercially available lumber within the USA. All data is in imperial units (Inches). Mechanical Tolerance Variations of Lumber: Per. Voluntary Product Standard PS 20-05, American Softwood Lumber Standard. Dimension lumber can be purchased as dry or ...


Weight of pressure treated lumber Depending on it's intended use, pressure treated wood only weighs between .25 to .6 pounds per cubic foot more than the wood itself. Southern yellow pine varies ...


A 12-foot length of treated, yellow pine 5/4-by-6 decking will weigh an average of 13.87 pounds (within a range of 10.65 to 17.08 pounds). If not fully dry, treated wood can contain up to 4.5 gallons of water, adding as much as 17.4 pounds to the weight of the 12-foot board.


This sturdy Pressure-Treated Timber #2 SYP Redwood-Tone meets This sturdy Pressure-Treated Timber #2 SYP Redwood-Tone meets the highest grading standards for strength and appearance. Treated for protection from termites and rot it is ideal for a variety of applications including decks docks ramps and other outdoor projects where lumber is exposed to the elements.


Forums MtbrBoard Feet Chart And CalculatorWeight Lumber CalculatorPost Capacities Simpson Strong TiePressure Treated Lumber Weight Chart Unique Wood SpeciesQuick Reference Weight Of Pressure Treated Lumber Roof2 In X 10 16 Ft Pressure Treated LumberMon 2 In X 6 8 Ft Actual 1 5 Prime Treated Lumber2 In X 12 Ft Prime Or Better Ground ContactHow…


The species of lumber, size of lumber and the load it carries. ... The longer the joist, the more area of deck the joist supports, and thus the beam supports. For pressure-preservative-treated southern pine no. 2 grade, there is a method that can be used for estimating beam spans for a preliminary design. ... Beam Span Chart Table How to ...