One bar is equivalent to 14.50 PSI. PSI stands for pounds per square inch and is a common pressure metric in North America.
You cannot directly convert PSI to GPM. They are two different units of measure. PSI measures pressure, and GPM measures flow rate. However, if other variables are known, you can use Bernoulli's equation to indirectly make a conversion. The following assumes the flow is...
Converting from pounds per square inch to pascals is a simple unit conversion problem that can be solved in a short amount of time with pencil and paper or calculator. Simply multiply the known information by the conversion factor, cancel the units and solve the equatio...
To calculate the pounds per square inch (psi) from the compression ratio, one needs the compression ratio and the atmospheric pressure measurement. Then, the first number in the compression ratio is multiplied by the atmospheric pressure, then divided by the second numb...
Pounds per square inch cannot be converted to ft-lbs because psi is a measurement of pressure, whereas ft-lbs is a measurement of total energy. Neither one is in the International System of Units as a primary form of measurement. Psi and ft-lbs are primarily American an...
One inch of water, as measured using a pressure gauge at four degrees Celsius, is equivalent to 0.036127291827 pounds per square inch (PSI). This conversion can be found at OnlineConversion.com.
One bar is a measure of atmospheric pressure that is equal to the pressure felt at sea level on Earth. It has largely replaced the older unit of one atmosphere, which is equal to 1.013 bar.