Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles. When replacing the Powertrain Control Module (PCM) on a PATS-equipped vehicle, a parameter reset or relearn procedure must be performed after the PCM is installed.
The passive anti-theft system (PATS) is installed on every Ford Expedition at the factory. While some erroneously call this system the factory alarm, it really is not an alarm system. The PATS system will arm itself if someone attempts to start the vehicle with anything other than the PATS key programmed to that specific vehicle.
With your Securilock system, you can unlock your doors without fumbling with your keys, sound the panic alarm in a dark street or parking lot and pop the trunk with your hands full. You can set or reset the remotes from your driver's seat in a few easy minutes with no professional equipment or experience.
How to Reset Anti Theft System Ford? The anti-theft system is one such feature created to protect our vehicle from being stolen, as the name rightly suggests. When the system detects that a person is trying to start the car by using a fake key or some other unconventional method, it ensures that the engine does not start by shutting the supply ...
How do i reset the Passive Anti-Theft System on my Ford Escape? Recently, my car was involved in an accident. When i got it back from the body shop, it was obvious that my remote keyless entry did not work, the radio will not come on, the power doorlocks & windows do not work, and none of the interior lights will cut on.
Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two. This gives the system time to reset or you won’t be able to start your car. Step 4: Start the engine. Attempt to start your engine.
Q: How do I reset the Passive Anti Theft System on a 2000 Ford Mustang ? My car has an automatic transmission. The passive anti-thief system (PATS) is programmed to work with your keys from the factory. Only a dealer with special...
Turn the key into the off position, then turn all the way on with out turning the motor over and let it sit like that for 10 min without touching it. This will reset the anti theft program in the ...
How do I reset the securilock passive anti-theft system on a 2008 ford focus? the red securilock car/lock indicator is flashing in the lower left corner of the dash. I have tried arming and disarming the lock using my key fob. When I turn the ignition key on, it just cranks the engine.
How do I reset the securilock passive anti-theft system on a 2008 ford focus? the red securilock car/lock indicator is flashing in the lower left corner of the dash. I have tried arming and disarming … read more