Web Results


In order to wire a two-way switch, a current tester, wire cutters, strippers, caps, a two-way switch and basic electrical knowledge are required. A two-way switch offers several benefits to the home, such as allowing one switch to control both a ceiling fan's light brig...


In order to wire a home light switch you need wire cutters and wire nuts. Start by turning off the power from the circuit breaker, then remove the switch plate, strip and connect the wires and place the new switch in the box.


To wire a basic light switch, turn off the power to the switch at the breaker, pull the wires to the switch out of the wall, connect the wires to the screws on the sides of the switch, and screw them down with a slotted screwdriver. Finally, test the switch.


Two way electrical switches have two types of wires connected to them: common wires and traveler wires. The common wire is the only wire that needs to be attached to a particular screw, often the dark one, on the 2-way switch.


Wiring a double light switch is a simple job that the average homeowner can do. However, it's important to use extreme caution when working with electricity. The required materials are a voltage tester, screwdriver, electrical tape, wire cutter, wire stripper and ground...


A three-way switch is wired with one switch connected directly to the light and a second switch connected to the first switch, allowing for a light to be controlled from two locations. Typically, one switch is connected to power using 14/2 wire, and the second switch is...


Lights that a person can control from two different light switches use specialty electric switches called three-way switches. Wiring this type of switch requires a special kit that features an additional red insulated wire to go along with the white and black wires alre...