Web Results

www.reference.com/article/can-one-wire-home-light-switch-9ac94424fa1c9367

In order to wire a home light switch you need wire cutters and wire nuts. Start by turning off the power from the circuit breaker, then remove the switch plate, strip and connect the wires and place the new switch in the box.

www.reference.com/article/live-neutral-wires-4d0e7a22f33a30ab

Live wires carry electric current toward a device, such as a main-powered appliance, while neutral wires carry electric current away from the device to close an electric circuit. Live wires are typically blue in color, while neutral wires are usually brown.

www.reference.com/article/wire-two-way-light-switch-e8df4e2aff686e8d

In order to wire a two-way switch, a current tester, wire cutters, strippers, caps, a two-way switch and basic electrical knowledge are required. A two-way switch offers several benefits to the home, such as allowing one switch to control both a ceiling fan's light brig...

www.reference.com/article/color-neutral-wire-4c4d5a33189704a7

The U.S. National Electric code and Canadian Electric Code mandates only white or grey color be used for neutral wires. The International Electrotechnical Commission and countries that abide by it, such as the United Kingdom, use blue for the wiring color code for neutr...

www.reference.com/article/wire-basic-light-switch-221775fe0891c99b

To wire a basic light switch, turn off the power to the switch at the breaker, pull the wires to the switch out of the wall, connect the wires to the screws on the sides of the switch, and screw them down with a slotted screwdriver. Finally, test the switch.

www.reference.com/article/common-wire-2-way-light-switch-f7ceecb28ee0b7c1

Two way electrical switches have two types of wires connected to them: common wires and traveler wires. The common wire is the only wire that needs to be attached to a particular screw, often the dark one, on the 2-way switch.

www.reference.com/article/wire-double-switch-light-e771d149bba747ed

Wiring a double light switch is a simple job that the average homeowner can do. However, it's important to use extreme caution when working with electricity. The required materials are a voltage tester, screwdriver, electrical tape, wire cutter, wire stripper and ground...