The neutral safety switch is located either in the steering column or next to the gear shift lever. The location depends on where the display is for the gear selection. More »

Replacing a neutral safety switch requires locating the components, disconnecting the battery and replacing the switch. The switch itself is responsible for preventing a driver from accidentally turning the car on while ... More »

www.reference.com Vehicles Car Parts & Maintenance

To test the automotive neutral safety switch on your car, examine the wiring of the switch, disconnect the switch and the wiring connector, and bring the vehicle's gear into reverse. Then, check if power is supplied to t... More »

www.reference.com Vehicles Car Parts & Maintenance

To troubleshoot an ignition switch in a vehicle, first open the fuse panel under the steering wheel column, and find and remove the fuse for the ignition starter by using the diagram on the fuse panel cover. Use the fuse... More »

In order to replace a turn signal switch the steering column must be removed, the battery disconnected and the unit replaced. The task is relatively simple to complete, but requires a basic understanding of the car's ele... More »

www.reference.com Vehicles Car Parts & Maintenance

To replace a car’s ignition switch, one must remove the steering column, disconnect the wiring, test the switch, and install the new switch, according to DoItYourself. This task requires a replacement ignition switch, a ... More »

Replacing a neutral safety switch requires locating the components, disconnecting the battery and replacing the switch. The switch itself is responsible for preventing a driver from accidentally turning the car on while ... More »

www.reference.com Vehicles Car Parts & Maintenance