Web Results


To remove mold from your home, thoroughly inspect the surrounding areas to identify the cause of the mold, and neutralize it to prevent future growths. Check for poor air circulation and sources of moisture, as these are the conditions necessary for mold growth.


Removing mold involves using water and detergent, getting rid of absorbent materials, drying the surfaces, and applying paint to the surfaces, according to the Environmental Protection Agency. It is important to fix any water problem to prevent mold regrowth.


Mold grows naturally in the environment and starts to grow in the home when spores land on a moist surface. In nature, mold is a part of the biological process that breaks down dead organic materials. In the home, residents should take steps to prevent mold growth.


To remove mold from your car, find where the mold is growing from. If removing it from carpet or car seats, use distilled vinegar and a wet vac to eliminate the mold. If cleaning mold off trim, use a biological cleaner or diluted all-purpose cleaner and detailing brush.


Some home remedies for removing mold include using vinegar, tea tree oil and chlorine bleach. For small areas and light mold growth, scrubbing with soap and water is enough to remove it.


To treat a plant for powdery mildew, mix 1 tablespoon of baking soda and 2 1/2 tablespoons of horticultural oil in a gallon of water, and apply the mixture to the plant. Commercial preparations of baking soda, sulfur, beneficial bacteria or neem oil are also available. Use the product according to t


To remove black mold, wash the affected area with detergent, and disinfect the area to kill the mold spores. It is necessary to eliminate any sources of moisture in the room to remove the mold successfully. The removal process can be completed in a few hours.


To remove wall mold, use a solution of chlorine bleach and water on the mold, and use a stiff brush to scrub the infected area. Rinse the wall thoroughly, and allow it to dry. Seal the dry clean wall to prevent moisture penetration, and use an electric dehumidifier near mold-prone walls to prevent f


To remove mold, take all items out of the room, and seal the room. Ventilate the room, and spray the affected areas of the room with a mixture of 1 cup of Borax and 1 gallon of warm water. Allow the solution to remain on the surfaces for one to two hours, and respray the area. Scrub the affected sur


To safely remove mold from cloth, take the item outside, brush off as much mold as possible, soak the cloth in a water and vinegar solution, pretreat mold stains with a borax cleaning solution, and wash as normal. Dry the cloth in direct sunlight, not in the dryer.