To determine the thickness of a metal gauge, determine what kind of metal you have, and use a standard sizing chart to determine the thickness. If you do not know the gauge, use a measuring tool.
Gauge, when applied to sheet metal, is used to determine the thickness of a single piece of sheet metal, with lower numerical values indicative of increasing levels of thickness. There are a number of standard gauge measurements in use, each with slightly different standard thickness.
To read a metal gauge thickness chart, determine the type of metal and the metal's gauge. Locate the gauge in the first column. Follow that row to the right to the column that indicates the metal's type. That column also features the pounds per square feet of the particular metal. The gauge decimal
This answer depends on the geographic location of the asker. In the United states, 12-gauge steel is 0.1094 inches or 2.78 millimeters thick. In Great Britain, 12-gauge steel is 0.109 inches or 2.769 millimeters thick.
Ten-gauge steel is 0.1345 inch thick. This refers to normal steel, as the numbers change for galvanized steel, stainless steel, and sheet and plate steel.
Standard 11 gauge steel is 0.1196 inches thick, and galvanized 11 gauge steel is 0.1233 inches thick, according to the University of North Carolina at Chapel Hill. A full list of steel gauges and their thicknesses are listed in the "How Many? A Dictionary of Units of Measurement" by Russ Rowlett, wh
Standard 20 gauge steel is .0359 inches thick. Galvanized 20 gauge steel is thicker at .0396 inches and 20 gauge aluminum is thinner at .0320 inches thick. The thickness of a piece of steel is also indicative of its maximum bending capacity.
The thickness of a sheet of 16-gauge steel is approximately 0.05928 to 0.065 inches. The thickness varies depending on the type of steel and the gauge standard. When measuring the thickness for galvanized, standard and stainless steel, the Manufacturers' Standard Gage is used in the United States.
Fourteen gauge standard steel is 0.0747 inches thick, while galvanized steel measures 0.0785 inches across. Galvanized steel has a zinc coating that guards against corrosion. In either case, the smaller the gauge, the thicker the steel.
Sixteen-gauge aluminum is 0.0508 inches thick. It is slightly thinner than standard steel and galvanized steel in terms of gauge.