Web Results


To clean a sewer line, locate the cleanout, remove the cap, insert a plumber's snake, push the snake until it hits the obstruction, turn the snake to snag the obstruction, and pull the snake out of the line to remove the blockage. Use a rooter to cut through roots in the line.


To replace a sewer line, cut off the water supply along the line, expose and remove the old sewer line, fit in the new line, and install the vertical pipes in the wyes. Seal the fitted portion and test it out to check for leaks. Fill the trench, tamping each layer of dirt with a gas-powered tamper o


Sewer line insurance is extra insurance a homeowner can purchase to help cover the cost of a sewer line clog, leak or break. Most homeowners insurance policies do not cover these kinds of repairs, according to The Law Dictionary.


To locate a sewage pipe, identify the area where the sewage pipe exits the home, and begin digging at the exit point to follow the pipe through the property. Homeowners can also contact local authorities to obtain maps of the sewage lines on the property.


Common problems with sewer lines include clogs, tree roots, leaks and bellied pipes. Depending on the type of pipe in use and its condition, it is sometimes easier to replace a line instead of making repairs.


To install new sewer pipe lining, pull a flexible resin-coated tube into the damaged sewer pipe and inflate it. With this technique, you install the new sewer pipe lining below ground without digging concrete, hardscapes or floors.


You can clean sewer lines using chemicals without professional help. The best product to use is a root-killing foam with metam-sodium and dichlobenil in it. You need to flush the foam down the toilet. The foam is going to get caught in the pipes, and it is going to take a couple of hours to kill the


The most commonly recommended grade for a standard 4-inch or 6-inch sewage pipe is from 1/8-inch to 1/4-inch per foot of pipe, though it differs by pipe diameter and location. Before installing any sewage line, check what the required pitch is in the local plumbing code.


One of the ways to locate a lost sewer is by checking with the municipality's local zoning office. Some cities and counties also provide online maps that show the locations of the sewers and water service areas in a neighborhood.


To remove tree roots from sewer lines and prevent new growth there are several options such as chemical and mechanical solutions that treat the problems in and around the pipes, as well as more complex solutions which involve cutting the root system so that root extensions die and can be more easily