To find the gallons of fluid that a tank can hold, first find the volume of the tank. Then, convert the volume of the tank into gallons.
Calculating the liquid volume of a cylinder involves multiplying the height by the area of its base or top. Input the number values correlating to the parts of the cylinder in the equation, either using manual or electronic calculation. Converting to the same units before multiplying results in an a
Measuring grams of liquid in a gallon requires knowledge about the type of liquid and its weight for conversion. In order to calculate grams in a gallon of liquid, its density must be known. Information regarding a liquid's density allows conversion between mass and volume, such as gallons to grams.
To convert a liter to a gallon, set a proportion of one gallon to the number of liters it contains versus the number of liters known to x gallons. A gallon is legally defined in the United States as 2.31 cubic inches, or 3.785411784 liters.
Miles per gallon can be calculated by using the odometer method when filling the vehicle's tank with gas. This method uses four easy steps to calculate miles per gallon.
To calculate volume in liters, measure the dimensions of the object in centimeters, calculate the volume in cubic centimeters, and convert the volume to liters. The project requires a metric ruler. A calculator reduces the time to complete the calculations and the chances of a math error.
To calculate the volume of any space, measure the length, width and height of the room. Multiply the length by the width and then by the height. Measuring the volume of non-rectangular rooms is a bit more complicated, requiring the division of the room into measurable sections.
The way you calculate the number of gallons in a pool depends on the type of pool you have. This is the general formula for calculating volume in gallons: length x width x depth x 7.5.
Calculate the volume of a cylinder using the formula pi x r^2 x h. You need to know the value of pi, the value of the radius of the circle at the end of the cylinder and the value of the height of the cylinder.
The volume of a pipe is found by multiplying pi by the height by the radius squared. This is the common equation for a cylinder.