Web Results

ocw.metu.edu.tr/pluginfile.php/3960/mod_resource/content/1/ch7/7-3.htm

INVERTED SLIDER-CRANK MECHANISM. Two different configurations of inverted slider-crank mechanism is shown above. In general, link 2 is the input and link 4 is the output. The prismatic pair is in between the links 3 and 4. The two inverted slider-crank mechanisms shown have the same input-output motion characteristics.

en.wikipedia.org/wiki/Slider_crank_chain_inversion

Slider-crank chain inversion arises when the connecting rod, or coupler, of a slider-crank linkage becomes the ground link, so the slider is connected directly to the crank.This inverted slider-crank is the form of a slider-crank linkage that is often used to actuate a hinged joint in construction equipment like a crane or backhoe, as well as to open and close a swinging gate or door.

en.wikipedia.org/wiki/Slider_and_crank_mechanism

Slider-crank chain inversion arises when the connecting rod, or coupler, of a slider-crank linkage becomes the ground link, so the slider is connected directly to the crank.This inverted slider-crank is the form of a slider-crank linkage that is often used to actuate a hinged joint in construction equipment like a crane or backhoe, as well as to open and close a swinging gate or door.

www.youtube.com/watch?v=-c3swraOB6o

Inverted Slider Crank Mechanism Type I: Preliminary Discussion ... Slider-Crank - Statics (What the MERM doesn't tell you) ... SLIDER CRANK MECHANISM - Duration: 15:56.

eng.sut.ac.th/me/box/2_54/425306/Slider-Crank - position analysis.pdf

4.7 AN INVERTED SLIDER-CRANK POSITION SOLUTION Figure 4-l0a shows inversion #3 of the common fourbar slider-crank linkage in which the sliding joint is between links 3 and 4 at point B. This is shown as an offset slider-crank mechanism. The slider block has pure rotation with its center offset from the slide axis.

www.cs.cmu.edu/~rapidproto/mechanisms/chpt5.html

Figure 5-13 Slider-Crank mechanism 5.2.7 Inversion of the Slider-Crank Mechanism. Inversion is a term used in kinematics for a reversal or interchange of form or function as applied to kinematic chains and mechanisms. For example, taking a different link as the fixed link, the slider-crank mechanism shown in Figure 5-14a can be inverted into ...

synthetica.eng.uci.edu/mechanicaldesign101/McCarthyNotes-3.pdf

Inverted Slider Crank The constraint equation for the inverted slider-crank linkage is the distance between the pivots AB on either side of the slider. In this case, the distance is not constant. Instead, it equals the amount of slider movement. The slider position s for each value of the input crank angle θ is computed using the quadratic ...

synthetica.eng.uci.edu/mechanicaldesign101/McCarthyNotes-2.pdf

are also called crank-rocker, rocker-crank, double rocker and drag-link mechanisms, to describe how they move. The inversions of the 3RP slider-crank consist of the RRPR called an “inverted slider-crank,” and the RPRR is called a “turning block.” The PRRR is the same as the RRRP.

www.u.arizona.edu/~pen/ame352/Notes PDF/3 Analytical kinematics.pdf

Slider-crank (inversion 1) In a slider-crank mechanism, depending on its application, either the crank is the input link and the objective is to determine the kinematics of the connecting rod and the slider, or the slider is the input link and the objective is to determine the kinematics of the connecting rod and the crank.