Web Results


Magnetic based security ink tags can be removed by using a special device called a magnetic detacher, which disengages the locking mechanism that fastens the item to the tag. This tool safely releases the security pin without spilling ink onto the merchandise.


Remove water-based ink from clothing by laying the article on a clean towel, wetting it and blotting the stain. Apply a liquid laundry detergent to the stain, and allow it to sit for about five minutes. Wash the item at the hottest temperature the care label recommends.


To remove ink from a paper document, first attempt the process on a non-valuable object to ensure the eraser does not damage the valuable document. Then gently brush and clean the area with an eraser or cleansing agent.


To remove skin tags, a patient will need to visit his or her dermatologist so the skin tag can be removed via scissors, burning or freezing reports Kid's Health. The pain is usually minimal and if the skin tag is too big then the area will be numbed prior to removal.


To remove ink from carpet, saturate the stain with rubbing alcohol. With a clean cloth, repeatedly press into the moist area. Spray the stain with lacquer hairspray until saturated and blot dry. Brush the newly cleaned stain and vacuum to remove the hairspray.


Remove ink from leather by wetting a white cotton cloth with rubbing alcohol and dabbing at the spot, working from the outside toward the center. For older marks, let the spot dry before dabbing again. After the mark is gone, apply a leather conditioner to restore moist...


Two common types of store security tags are RFID tags, which use a radio frequency, and ink tags, which burst and spray ink if a special tool is not used to remove them. These tags must be deactivated or removed by store personnel.