Local dealerships, repair shops and national chains, such as PepBoys, all repair ignition switches, as it is a common repair. The cost of this repair often ranges from about $350 to over $500, as of 2015.
It is easier to replace an ignition switch than manually attempting to repair the device. The ignition switch may have failed if a vehicle does not start or if the dashboard lights don't turn on when the key is turned to the on position.
To repair an ignition switch with a broken key, put the ignition in neutral by inserting a thin hacksaw blade beside the broken car key. Apply the WD-40 lubricant to clean out dirt that may cause binding or friction while using the hacksaw blade to push the key out.
The ignition switch sends voltage through all of the components that start the engine. An ignition switch is found inside the steering column of a vehicle and is connected to the lock cylinder. When the key is turned to the on position, voltage flows from the battery to...
An ignition switch works by turning the car's ignition system on and off. It is operated by an ignition key that flips it on and off. This switch is located on the car's steering column or dashboard.
The steering column of a vehicle and the dashboard are the two common locations for a car's ignition switch, according to Your Mechanic. This location makes it easy for the driver to start a vehicle and enables the transfer of power to the starter after a turn of the ke...
Replacement ignition switches are available at most auto part stores, including JC Whitney, O'Reilly Auto Parts and NAPA. Each of these stores also make the ignition switches available for purchase online, according to their websites.