Web Results


Place the case back on the case and use your thumb and forefinger to snap the snap-down version into place. This will work on vintage Timex watches. Newer snap-down models may require a watch press, which is outlined in Step 5. Place the Timex watch crystal side down on the bottom pad of a watch press. Fit a pad, or die, into the top press pad ...


The jeweler uses a watch case press fit tool for this purpose. They have a set of dies for the different size watch case combinations. The watch is fitted between the two dies, and then the tool presses down to press fit the cover and the body of the watch back together. Take the watch to a local jeweler if you cannot get the cover back on.


" Try at Your own risk" In this video I would like to show you guys how i was able to remove and to put back the snap off watch battery cover without using any super special tools but simply a ...


The tools needed to replace the back cover on a timex indiglo watch can be purchased at most online and local watch or jewelry stores. Place watch on a clean and soft cloth. This will protect the glass on the front of the watch while you are working on replacing the back cover.


Lay the watch, back down & cover in position, on a firm flat surface, making sure the cover is in contact with the surface; if not, due to the shape of the watch or strap, pack between the cover & flat surface.


Can't put (back) back on my timex indiglo I have a fairly new mens indeglo watch but recently it got mosture in it and fogged the crystal. I popped the back off to let it air dry (room air).


Yeah, I had this problem on a Timex Indiglo, but didn't have it on the cheap $20 watches in drug stores and discount stores.Timex puts a tighter cap on the back, probably for quality reasons, and you cannot push it together by your thumb.


How to open and close snap off watch back cover and change Batteries.


Make sure that notch is aligned above the watch stem before placing the back on the watch case, otherwise you will risk damaging the watch movement. Step 3. Now that the back is in place, you are ready to press the back on. Take the watch case in your hands, keeping the back balanced on the watch case.


Replacing a battery on a Timex Expedition watch can be rather difficult, especially since you want to be able to preserve the watch's watertight qualities. While most people choose to take the watch to a jeweler to have this done, it is possible to do it yourself. Instructions. 1. Make sure the little arrow on the back is aimed to the right.