Web Results

www.reference.com/article/gauge-thickness-bd26ab9dcd28cd20

Gauge, when applied to sheet metal, is used to determine the thickness of a single piece of sheet metal, with lower numerical values indicative of increasing levels of thickness. There are a number of standard gauge measurements in use, each with slightly different stan...

www.reference.com/article/thick-10-gauge-steel-8bce6a6c42c5d247

Ten-gauge steel is 0.1345 inch thick. This refers to normal steel, as the numbers change for galvanized steel, stainless steel, and sheet and plate steel.

www.reference.com/article/determine-thickness-metal-gauges-bf5a27f8b0c815a5

To determine the thickness of a metal gauge, determine what kind of metal you have, and use a standard sizing chart to determine the thickness. If you do not know the gauge, use a measuring tool.

www.reference.com/article/thick-20-gauge-steel-7e1933196d61a5c3

Standard 20 gauge steel is .0359 inches thick. Galvanized 20 gauge steel is thicker at .0396 inches and 20 gauge aluminum is thinner at .0320 inches thick. The thickness of a piece of steel is also indicative of its maximum bending capacity.

www.reference.com/article/thick-12-gauge-steel-9c58a90de8b273b1

This answer depends on the geographic location of the asker. In the United states, 12-gauge steel is 0.1094 inches or 2.78 millimeters thick. In Great Britain, 12-gauge steel is 0.109 inches or 2.769 millimeters thick.

www.reference.com/article/thick-11-gauge-steel-37189fdb276ae2ef

Standard 11 gauge steel is 0.1196 inches thick, and galvanized 11 gauge steel is 0.1233 inches thick, according to the University of North Carolina at Chapel Hill. A full list of steel gauges and their thicknesses are listed in the "How Many? A Dictionary of Units of Me...

www.reference.com/article/thick-16-gauge-steel-bbe2ae631f059fd8

The thickness of a sheet of 16-gauge steel is approximately 0.05928 to 0.065 inches. The thickness varies depending on the type of steel and the gauge standard. When measuring the thickness for galvanized, standard and stainless steel, the Manufacturers' Standard Gage i...