Web Results


To find a leak in a hot water tank, check if you can hear a hissing sound coming from the tank. A more accurate method of detection is to disconnect the drain pipe and see if the pressure relief valve is leaking.


Use the water meter for your home to detect a water leak. Choose a time when no one is using water and make sure all appliances, including ice makers, are off before taking the initial reading. After one to two hours read the meter again. If the reading has changed, there is a water leak.


To detect an outdoor water leak, turn off all items that use water, such as the sprinklers and dishwasher, and turn off the home's main water supply valve. Write down the meter reading, and check the water meter in one to two hours. If the water meter reading changes, an outdoor water leak is presen


You do not need any special equipment to detect water leaks. A water leak in your plumbing system can be detected by monitoring your water meter.


Some ways a pool leak can be detected are by observing if there is a noticeable drop in the pool's water level and looking for any cracks or wet areas around the pool that may indicate an underground plumbing problem, states American Leak Detection. A leak may also be present if there are other sign


A leak detection pump in an automobile identifies fuel system leaks that may affect vehicle performance and harm the environment. It does so by pumping air into the fuel tank and charcoal canister so that the engine control module (ECM) can measure the system's pressure decay. Leaks are the most com


Ways of detecting a natural gas leak include checking the meter, the appliances and the connections for signs of damage, as well as their surroundings for both patches of dead vegetation and substances being blown about by unseen currents. Other signs could include hissing, roaring and even a whistl


To detect an underground leak, turn off all water to the home, open the water meter cover, mark the gauge where the needle points and come back in 30 minutes to see if it has moved, advises HomeTips.com. Also look for signs of leaks in the yard.


Plumbers often detect slab leaks by turning off the water, pressurizing the lines with air and using special equipment to listen for the escaping air. However, most homeowners first notice the problem as a wet or warm spot on the floor or when they receive an abnormally high water bill.


It is possible to detect a pool leak by buying a leak-locating dye products and using it near a suspected leak site. Pool supply companies sell leak detection dye products that come with concentrated dye inside a special syringe.