Web Results


False Fire Alarms Instead of beeping, you may have a smoke detector going into alarm for no reason. False fire alarms like this can have many causes, but here are a few of the most common. Dirty Smoke Detectors. Even the cleanest homes can have dust, and it is one of the biggest causes of smoke detector problems.


Electrical - AC & DC - hard wired smoke detectors going off - hi, in the last hour my smoke detectors have been going off in my entire house. there isn't any fire or smoke or anything, and i'm not


A change in the electrical current to the wired smoke alarm will cause the smoke alarm sound to go off when there is not smoke in the air. When the electricity in the home is cut off during a storm or other event, or if the electrical current spikes, the smoke alarm can go off, causing a false alarm.


Burley Electrical Services can come out and check your wiring and see if that is the reason that your smoke alarms keep going off. We install hard wired smoke alarms if you are in need of a new one installed in your home. Give us a call today to set up your appointment!


The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. ... If you have hardwired alarms, the first step is finding the initiating unit, as that is the key to stopping all of the interconnected units: ... Turn off the power to the smoke alarm at the circuit breaker.


I have 8 hard wired battery backup Kidde smoke detectors in my home (6 fire only and 2 combo fire/CO). In the last week I have had three annoying and ear piercing false alarms, meaning no smoke or other elements setting it off. I vacuumed all detectors to make sure it wasn't a dust issue, but that didn't solve the problem.


Last night around 2am, all three of the hard-wired (not battery powered) smoke detectors in our apartment went off. We were unable to use the reset buttons and had to physically disconnect them to get the alarm to go off. There was no smoke or other sign of a real threat that could have set them off.


Ionization smoke detectors can mistake dust for smoke. So if your ionization smoke detector is covered in dust, that’s why it sets off the alarm even if there’s no smoke. You’ll know if you have an ionization smoke detector if the letter “I” is in the model number or there’s any mention of radioactive material, like Americum-241.


My father's home has hardwired smoke detectors that are all wired together. Years back there were two different occasions that all of the smoke alarms in the home were going off for no apparent reason. One time we came home and all of the smoke alarms were alarming while we were gone. Another time it happened while we were home.


Your first step is to find the device that’s going off and reset it by pressing and holding the reset button. If that doesn’t work, take the smoke alarm down. ... As for hardwired smoke alarms ...