Web Results


A common problem for customers who have a Gutter Helmet installed is water pulling wet debris, such as leaves and twigs, around the curved nose and into the gutter where it accumulates. This collects with other debris until the gutter becomes blocked.


Heated Gutter Helmet utilizes heated cables to melt ice and snow. The heated cables are typically installed directly under the Gutter Helmet, and the system turns on automatically when temperatures cool.


To install gutters, drill holes in the fascia, cut the gutters, attach gutter caps, cut the downspout holes, and attach the gutters to the fascia. This projects takes six to eight hours to complete.


To install gutters, first figure out how the gutters should channel the water. Take the required measurements along the edges of the roof. Add approximately 10 percent to the measurement to cater for wastage.


Clean gutters by scooping out the leaves, dropping them onto a tarp and discarding them in a compost pile. Clear the downspout with a garden hose, and flush the entire system with the hose starting at the spot farthest from the downspout.


A gutter helmet's nose-forward design protects a continuous 3/8-inch water opening designed to keep leaves and debris out of the gutter, while a leaf guard's 5/8-inch vertical opening is less likely to prevent debris from entering the gutter. Gutter helmets, while appearing seamless, are comprised o


To install gutters on a home, mark where the gutters need to be installed using chalk, and cut the gutters to fit the measurements using a hacksaw. Install the brackets for the gutters, determine where the downspout is going to be, cut out an opening there, and install the downspout connector and en


To hang gutters, mark the lines, cut the gutter, and attach the fascia brackets. Prepare the gutter by attaching end caps and cutting a downspout hole before installing the gutter and attaching the downspout.


To repair gutters, identify the problems, apply gutter sealant to leaky joints, prepare and patch holes, and fix areas of sag. Repairing gutters takes roughly one day and requires gutter sealant, a gutter patch kit, roofing cement, a wide putty knife, a wire brush, a ladder, a tall brace and gutter


Rain gutters are shallow troughs that collect water as it pours off of a house and feed into downspouts that direct the water away from the house's foundation. If gutters aren't in place, rain quickly pours off of the roof, splashing dirt onto the house and washing away soil.