Web Results


Washing machine not agitating? This video provides information on how to troubleshoot a top-load washer that won’t agitate and the most likely defective parts associated with this problem.


If your Hydrowave washer does not agitate or spin after filling with water, the washer motor may need to be reset. This can be completed without tools. Learn...


The washer will not agitate or spin with the lid up, though many models will still fill and drain and the timer will advance. Most models have either a lid switch probe or a magnet on the lid that activates the lid switch when the lid is closed. If missing or damaged, the washer will not agitate or spin, even with the lid closed.


My GE top load washer won't agitate or spin. I defeated the lid switch by putting the two wires together with a wire nut. This did not help. The washer goes through all the steps ending at the spin - but it is not actually agitating or spinning when it should be. The drive belt is connected and looks good. I can spin the tub by hand and it seems to spin freely.


GE Hydrowave WBSR3140GWW, 2 years old Success story: Washer seemed to have just quit spinning and agitating. ... GE Washer won't spin or agitate. by Amy (Phoenix, AZ) GE Hydrowave WBSR3140GWW, 2 years old ... I had to come up with a better way to replace the belt on this washer. On previous GE models I never had the need to remove the bottom ...


Troubleshooting | Washers & Dryers. ... Service & Repair for Washers & Dryers. At GE Appliances, our goal is to ensure your satisfaction, while offering the highest levels of professional service at affordable and competitive rates. ... If your Hydrowave washer does not agitate or spin after filling with water, the washer motor may need to be ...


GE Washer wont agitate or spin. by Mike (Clayton, NC) Have a GE Profile washer that is 3 years old model #wpre6100g0wt. The pump works but it will not agitate or spin. I have continuity across the fuse. Performed a lid switch test I found on line and it tested good. No flashing light on the motor in fact no light at all.


Washer Fills but Does Not Agitate. If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.. Washer Doesnt Agitate or Spin Top Load Washer will not agitate or spin Google Search


SOURCE: GE washer GNSR2140A0WW wont spin/agitate but fills and drains Hello, your problem is going to be with the lids switch, in this machine it is going to be a magnetic contact. You can confirm this my pulling the front panel off and accessing the wireing to the lids switch, If you have electrical knowledge bypass the lid switch using a wire nut and run the machine.


Why does my Hydrowave washer hesitate after it fills with water? What's the clicking sound from my Hydrowave washer? Why does my washer not fill? My top load washer is making noise during the cycle. Are these normal sounds? Why aren't the lights / controls on my washer working properly? What do I do if my washer drains and fills at the same time?