Web Results

forums.whirlpool.net.au/archive/1813888

try to remove the encryption (the WPA2) and instead limit the access through the mac address list, it less secure and more painful but it really helps me when im playing online or in lan, not sure why but my theory is that all the data has to be encrypted and then decrypted before going to your device and that would take long so unencrypted would be faster (my 2 cents xD) hope that helps but ...

us.battle.net/forums/en/heroes/topic/16492669271

Very useful info for wireless users ... I've had a couple of quick matches over wireless without any spikes Beacon period=50 RTS threshold=2304 Fragmentation threshold=1000 Gaming Environment doesn't seem to change much. @Tara: I don't think signal strength is the issue, I had similar spikes when being near the router. ...

www.avg.com/en/signal/boost-home-wi-fi-signal-strength

Unless you’re facing problems with an unreliable network, reducing the fragmentation threshold is not recommended. Make sure it is set to the default settings (usually 2346). Enable multimedia/gaming settings: Some wireless adapters can be configured for regular use or for gaming/multimedia. If you’re streaming video or playing games ...

resources.infosecinstitute.com/rts-threshold-configuration...

If the packet size is less than the threshold or below average, the function will not initiate. RTS & Fragmentation threshold for improved performance. The recommended standard of the RTS threshold is around 500. A low threshold implies RTS packets are transferred more frequently and the throughput of the packet is on the lower side.

now.avg.com/boost-signal-strength-improve-wi-fi-network-part-2

Unless you’re facing problems with an unreliable network, reducing the fragmentation threshold is not recommended. Make sure it is set to the default settings (usually 2346). Enable Multimedia/Gaming settings: Some wireless adapters can either be configured either for regular use or for gaming/multimedia. If you’re streaming video or ...

serverfault.com/questions/369850/rts-threshold...

Setting the RTS and fragmentation thresholds to the maximum means that no packets will meet the threshold. The fragmentation threshold limits the maximum frame size. This reduces the time required to transmit the frame, and therefore reduces the probability that it will be corrupted (at the cost of more data overhead).

sites.google.com/site/embeddedsystesting/wireless...

What is Fragmentation threshold in Wireless (WLAN)/ How Fragmentation threshold is used in Wireless Fragmentation Threshold is one more parameter which is given in all stations and Access points. Fine tuning Fragmentation Threshold parameter can result in good throughput but not using it properly can results in low throughput.

www.home-network-help.com/wireless-network-performance.html

Improving Wireless Network Performance by Tuning Advanced Wireless Settings on Wireless Device . Hello! Let's test and try to improve wireless network performance by tuning advanced wireless settings on wireless router or access point if you encounter following problems: - Wireless network adaptor fails to detect any wireless network

forums.tomshardware.com/threads/best-settings-for-sbg6580...

Next, click advanced under wireless - XPress technology should be enabled, Beacon Interval at 50, DTIM Interval at 1, Fragmentation Threshold at 2307, RTS Threshold at 2306, N Rate at 6Mbps, 802.11n Protection off (by choice), and Multicast rate of 1 Mbps.

www.ispreview.co.uk/index.php/2015/04/10-top-tips-boosting...

The RTS Threshold protocol is a tricky one to explain, but it helps to clear the channel before data is sent. A lower setting may help in busy WiFi environments as it should reduce collisions, but set it too low or incorrectly and your network performance may suffer. It’s a tricky balancing act to get right. Fragmentation Threshold