To ignite a gas fireplace, turn the gas supply valve on, press and turn the valve control knob to the 6 o’clock position, and press the igniter button repeatedly until the pilot ignites. Turn the fireplace wall switch or... More »

www.reference.com Home & Garden Appliances

To light a fireplace, warm up the flue, and then ignite a starter brick. Add a log behind and in front of the brick, and then add a third across the first two logs. You need black and white newspaper, a fire starter bric... More »

www.reference.com Home & Garden Home Maintenance

To start a fire in a fireplace, the Chimney Safety Institute of America recommends the top-down fire method that requires inspecting the fireplace, stacking fire materials appropriately and igniting them. This procedure ... More »

www.reference.com Home & Garden Heating & Cooling

To light a gas fireplace, turn the gas supply valve on, depress and hold the supply valve in, and repeatedly press the ignition button until the pilot flame lights up. Release the control valve once the pilot is lit. More »

To repair a gas fireplace, inspect the pilot light, the igniter and the fuel valve if the fireplace does not ignite. Check for loose connections and inadequate voltage if the main burner does not come on. Also, ensure th... More »

www.reference.com Home & Garden Heating & Cooling

To relight a gas heater pilot light, turn the valve to the off position for three minutes then switch to the pilot position; hold a lit match to the pilot opening and press the reset button until the flame burns brightly... More »

Light a water heater by waiting for gas to dissipate, turning the control knob to pilot, igniting the flame, holding the control knob pressed in for one minute and turning the knob to the on position. Never attempt to li... More »

www.reference.com Home & Garden Appliances