https://www.f150forum.com/f118/torque-specs-after-level-318854/

2015 - Present Ford F150 - Torque specs after level - Does anybody have a list of the torque specs for the upper ball joint, tie rod, sway ... Sway Bar End Link lower- 60 LB FT, Upper End Link bolt 50-55 LB FT ... Front leaf to frame- 258 LB FT

https://www.f150online.com/forums/lightning/185458-upper-lower-control-arm-torque-specs.html

Apr 11, 2017 ... Does anybody know the torque specs for installing upper and lower control arms ? ... tie rod end nut 57-76 ft lb ... You mean the spindle nut on the front hubs?

https://www.ford-trucks.com/forums/858240-ultimate-torque-spec-list.html

Jun 9, 2009 ... 2004 - 2008 F150 - Ultimate Torque Spec List - Hey Guys....I along with ... Suspension - Lower Shock bolt - 350 Ft-Lbs ... 4x4 Front Suspension.

http://www.torkspec.com/torkspecmm.aspx?KI=182

Ford F-Pickup Torque Specs. Over 6000 Automotive Torque Specs. Search Car Torque Specifications ... Note: Gen X 150/250 - Hose to Caliper Banjo Bolt - FRONT/REAR ..... Note: Gen X 150/250 - INNER Tie Rod End - 56 FtLbs + Align Pin ...

https://www.americantrucks.com/roughcountry-25in-strut-extensions-0913-manu-install.html

2009-2013 F-150 Strut Spacers ... Using a 29mm socket, and 1 1/16” wrench, torque to factory specs. ... Vehicle will have to have a front-end alignment. 20.

https://www.groundforce.com/files/instructions/leveling/3842-15307.pdf

2015 & UP F-150 FRONT LEVELING KIT .... SPIRALED DOWN STOP AGAINST THE END. OF THE ... TORQUE THE STRUT SHAFT RETAINING NUT TO SPEC.

https://www.cjponyparts.com/skin/frontend/cj-pony/default/images/install-pdf/install_569.pdf

Thank you for choosing Rough Country for all your suspension needs. ... 2-Front Strut Extensions ... Using a 21mm wrench, torque to manufacturer specs.

https://www.youtube.com/watch?v=-QczV_6v42A

Aug 12, 2014 ... ... to the frame loose, put the tires on, put the car on the ground, and then torque down the bolts to the correct torque with the car on the ground.

https://www.cjponyparts.com/skin/frontend/cj-pony/default/images/install-pdf/install_568.pdf

Thank you for choosing Rough Country for all your suspension needs. Rough Country .... Using a 21mm wrench, torque to manufacturer specs. If ball joint turns  ...

https://www.fordraptorforum.com/threads/torque-specs.11451/

Torque spec thread I've been meaning to put together for some time. It doesn't list them all, just what I had time for. I'd like ... Front Suspension