Web Results


Disclaimer. All content on this website, including dictionary, thesaurus, literature, geography, and other reference data is for informational purposes only.


Excavation and embankment (cut and fill) ... Step 3: Convert Cubic Feet to Cubic Yards 3 - CY soil = CF soil/27 = 7000 ft /27 = 260 CY Fill Cut 2 Cut 1 . To figure out what is the total net cut/fill between stations 1+00 and 3+00. Columns Station #, Cut Area, and fill area will be given


What Is a Bank Cubic Yard? A bank cubic yard, or BCY, is the calculation or measurement of 1 cubic yard of earth or rock in its natural state before it is removed from the ground. The volume measurement is commonly used in the mining and construction fields.


How do I convert bank cubic yards to loose cubic yards? ... a structural fill embankment constructed in controlled lifts may have an 8-inch-thick layer of loose fill soil spread in place and then compacted to a thickness of 6 inches. In addition, a typical swelling factor of 25% is used to account for increases in volume during transportation ...


Estimating Earthwork Earthwork includes: 1. ... Job Efficiency Factors for Earthmoving Operations Units of Measure Cubic Yard (bank, loose, or compacted) Volume Bank: VB Bank cubic yards (BCY) Density B Lb /BCY Loose: Vl Loose cubic yards (LCY) Density L Lb/LCY Compacted: Vc Compacted cubic yards (CCY) Density C LB/CCY Swell: A soil increase in ...


Cubic Yard Calculator. We sell all of our online materials by the cubic yard. A cubic yard is equal to 27 cubic feet. You can use the online calculator to determine how many cubic yards of material are required. As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.


A cubic yard is an Imperial / U.S. customary (non-SI non-metric) unit of volume, used in the United States. It is defined as the volume of a cube with sides of 1 yard in length.\n1 yard = 3 feet ...


Bank Cubic Yards Bank Cubic Yards (BCY) is the undisturbed state of soils in the ground. It is sometimes referred to as “in situ” or “in place”. Why do we use Bank Cubic Yards? Because massive road projects can sometimes mean that the project will require, say…1,500,000 BCY of earth excavation. It’s


Cubic Feet. A cubic measurement is the three-dimensional derivative of a linear measure, so a cubic foot is defined as the volume of a cube with sides 1 ft in length. In metric terms a cubic foot is a cube with sides 0.3048 metres in length. One cubic foot is the equivalent to approximately 0.02831685 cubic metres, or 28.3169 litres.


NDDOT Construction Conference 2011 East Conference: March 2 and 3, 2011 ... In other words, compacted cubic yards have been converted into bank cubic yards so you can compare “apples to apples”. SEEDING ... Vertical Axis- Cubic Yards (excavation and embankment).