Web Results


A wire-to-wire connector is a device, usually made of plastic, that is used to join electrical circuits together by creating a joint between two sections of wire. This serves to extend the flow of electricity wherever needed.


Common AMP electrical connectors include automotive, input-output, printed circuit board, coaxial RF and power system connectors. Several types of AMP connectors, including low-medium current, MCP, CT, mini CT and AMPSEAL 16, are available.


There are five main types of electrical wiring that are commonly used, especially in a home, including triplex wire, main feeder wire and panel feed wires. Other types of wire include nonmetallic sheathed wire and single strand wire.


Basic concepts of electrical wiring involve creating circuits that provide electrical power for equipment and devices. The majority of residential wiring utilizes single-phased power to provide varying levels of voltage to outlets and appliances. Plastic boxes and flexible non-metallic cables are co


The most useful tips for electrical wiring include having the right tools before wiring begins, having an adequate length of cabling material and wiring the cables after heating and plumbing systems are installed, notes Ask The Builder. These steps prevent voltage drops, short circuits and incomplet


To replace an electric plug connector, cut off the damaged plug, open the replacement plug to reach the terminal screws inside, attach wires and then reassemble the replacement plug. When replacing, the black or colored wire attaches to brass screw while the neutral white wire attaches to the silver


Common automotive electrical connectors include butt, ring terminal, quick disconnect and closed-end automotive wire connectors. Butt connectors, the most common crimp-style connectors, make end-to-end connections between two wires, while a ring terminal, another common crimp connector, is useful fo


Electrical connector charts usually include information on the method of connection that a particular connector uses and how a wire fastens to and terminates from the connector. Many electrical connector charts also include information on the physical characteristics and designated performance stand


Three-way electrical wiring makes it possible to control a single electronic receptacle (or group of receptacles) from two different locations. This type of wiring is commonly used in residential spaces to control lighting.


Common electrical wire sizes and types include THHN or THWN and cable, which both come in gauges 10, 12 and 14. Cable is also available in gauges 6 and 8.