Web Results


Cross-connection definition is - a connection in a plumbing installation through which water may possibly pass to or come in contact with another part (as a water inlet in a bathtub that may at times be below the water level of the tub).


Plumbing CROSS CONNECTIONS - Health & Safety Risks from Plumbing Cross Connections. Definition of plumbing cross connection: a plumbing cross-connection is defined as any physical connection or arrangement between potable water and any source of contamination. Examples of cross connections are shown at left.


cross connections What is a Cross Connection? A cross connection is a point in a plumbing system where the potable water supply is con-nected to a non-potable source. Briefly, a cross connection exists whenever the drinking water system is or could be connected to any non-potable source (plumbing fixture, equipment used in any plumbing system).


Cross-connections are hardware (cables, cords, and jumpers) that connect separate units of the facilities within a data center. They are usually maintained by a single data center or across multiple data centers, and can be used for many purposes: Trading companies may use hundreds of cross-connections between servers to ensure trades are done as quickly as possible.


Typically, when two different companies own the facilities involved in the proposed cross-connect, one company provides a letter of authorizarion (LOA) authorizing the other company to order the cross connect to a specific connecting facility assignment (CFA, which is the patch panel connection, port, channel, VLAN, etc., where the other side ...


Explaining Cross-Connections, Backflow Prevention, & Safe Drinking Water. Cross-Connection Control Program Regulation. Purpose. The following is presented to provide a general explanation on the subject of backflow prevention.


cross-connect definition: A device that allows conductors or channels to be interconnected, either physically or electronically, on a semi-permanent basis. A cross-connect can be in the form of a main distribution frame (MDF), intermediate distribution frame...


The Standard Electrical Dictionary (0.00 / 0 votes) Rate this definition:. Cross Connection. A method of disposing of the effects of induction from neighboring circuits by alternately crossing the two wires of a metallic telephone circuit, so that for equal intervals they lie to right and left, or one above, and one below.


The difference between these two types of cross-connections is very simple. A direct cross-connection is subject to backpressure (as shown above); an indirect cross-connection is not subject to backpressure. An example of a direct cross-connection would be the make-up water line feeding a recirculating system.


Cross-Connection Control Manual, Division of Sanitary Engineer- ing, Tennessee Dept. of Public Health, 1975. Cross-Connection Control Regula- tion in Washington State, Washington State Dept. of Social and Health Services, Denver, Colorado, 1974. Second Edition.