Common hot tub error codes include Flo or FLC, Dr or DRY, COOL, SnA or SnB and OH, according to Swim University. Learning the meaning of these codes can keep hot tub owners from having to call a repairman.
Although the task of moving a hot tub is best left to expert movers, the job can be done with the help of several strong individuals to do the heavy lifting and a few tools to make moving the tub relatively easier. A hot tub can weigh anywhere between 1,200 to 1,500 lb...
Read through the instruction manual, unplug and remove all wiring, take apart the tub skirt, drain the water, and remove the tub. If discarding the spa, cut the tub apart. Otherwise, seek help with rolling the tub away.
Clean a hot tub by removing the filter and adding a biofilm line-flush product. After the product circulates, drain the tub with a submersible pump, wipe it with vinegar, and refill the tub with fresh water. Install a new filter and chemicals, adjusting as necessary.
To wire a hot tub, contact a local inspector, inspect the service panel, run the wiring, connect the hot and neutral wires, wire the disconnect box and connect the hot tub wiring. Have your work inspected by a licensed electrician before turning on the hot tub.
In a 2013 Readers' Choice List compiled by Lisa Hallett Taylor for About, Coast Spas was named as the best brand of hot tubs to buy. Runners-up included Bullfrog Spas and Hot Springs Spas. The brands were rated on factors such as design, style, company reputation, avail...
To drain a hot tub, users should first turn off the power going to the tub. The best way is to turn the breaker to the off position.