Web Results

www.reference.com/article/car-igniter-c70fa701bc02414b

A car igniter is a component in the car's engine that is responsible for sending a signal from within the distributor to the ignition coil, making the spark plugs fire. It is also known as the ignition control module.

www.reference.com/article/car-ignition-system-work-eb427f1087875530

The ignition system of a car engine works by creating a controlled spark using an engine control unit. The engine control unit determines the best timing to initiate the spark in the ignition system, which then ignites the fuel vapors in the vehicle and starts the engin...

www.reference.com/article/locate-car-s-ignition-module-76b46cc09400a600

A car's ignition module is located inside the distributor, on the distributor or in the engine compartment, depending on the make and model of the car. It is normally coated with an insulating material to protect the internal electronic components.

www.reference.com/article/car-s-ignition-switch-36e901e08ed8859

The steering column of a vehicle and the dashboard are the two common locations for a car's ignition switch, according to Your Mechanic. This location makes it easy for the driver to start a vehicle and enables the transfer of power to the starter after a turn of the ke...

www.reference.com/article/source-ignition-550deacd24edb390

Many sources of ignition exist, including open flames, hot gases, hot surfaces, mechanical sparks and electrical sparks, among others. In the process of ignition, once a propagating flame is provided enough energy from an ignition source, it turns into a self-sustaining...

www.reference.com/article/locate-club-car-dealer-58d1213424b072c9

As of 2016, a Club Car customer can locate a dealer by using the Dealer Locator tool provided on ClubCarDealer.com. This tool requires the customer to select the type of vehicle that he wishes to purchase and then specify his locality by using a country and ZIP code com...

www.reference.com/article/can-adjust-car-s-ignition-timing-59b0ab6e8a077aae

To adjust the ignition timing on an older car with a distributor, wire up a timing light and run the engine with the light pointed at the crankshaft and the pulley that extends from it. The notch on the pulley is the top dead center, and it should flash when the timing ...